How to Prolong the Service Life of Fin Tube Radiator?

According to the maintenance of the finned tube, the service life of the fin tube will be greatly improved. The long-term use of any thing is inseparable from careful maintenance and protection, and the same is true for the finned tube.

1. The finned tube is welded with scaly fins by high-frequency welding, so avoid impact and extrusion during installation and use, which will easily deform and even interfere with the heat dissipation effect.

2. Because the finned tube scales are spirally distributed, some sediment and rust will appear in long-term use. We must regularly check whether each finned tube is intact, whether there are deposits, crystals, rust and other deposits, and clean them in time.

3. Check whether the interface of the finned tube is loose and the foot pad is off.

4. The exposed position of the finned tube should be prevented from dripping with rainwater, and it should be kept as dry as possible. It should not be too close to the ground to prevent the finned tube from being corroded by watering in the greenhouse.

The function of the high-frequency welded fin tube radiator increases the surface area or internal surface area of the light tube, so that the goal of improving the heat transfer efficiency can be achieved. This is also a kind of wear-resistant, new heat exchange raw materials, in the whole process of use is an energy-saving heat exchange parts, the equipment is mainly based on high-frequency power supply as a heat source, the steel pipe and steel strip at the same time to do a good job of heating, the two fusion welding together, become one.

High frequency welded finned tube radiator with high heat exchange efficiency and large total heat dissipation effect, the whole equipment has a long service life and the applicable temperature range is relatively wide, etc. The equipment is used in petrochemical industry, economizer, waste heat recovery, greenhouse, power station boiler, wood drying and other industrial fields. The installation and operation of the high-frequency welded fin tube is convenient, reducing the connection point, so that the installation of the equipment will become economical and fast, but also reduce the probability of leakage at the connection, the equipment protection is simple, after the installation is completed, no special protection is required. Finned tube radiator use efficiency is high, in the process of making the steel pipe and fin winding full contact welding, the total heat dissipation area is 8 times that of the light tube, the inside of the equipment will be smooth and the resistance of water flow is relatively small.