9kg rail is a lightweight steel rail manufactured in accordance with GB/T 11264-2012, intended for light-duty rail systems with low speed and moderate load requirements. With a nominal weight of approximately 8.94kg per meter, it is commonly used in temporary tracks, small mining transport lines, and light industrial rail systems.
The compact profile and low unit weight allow easy handling, fast installation, and reduced structural load. 9kg rail is suitable for short-distance transport, low-frequency operation, and projects where cost control and installation efficiency are priorities.
The 9kg rail standardized dimensions ensure stable wheel guidance, smooth operation, and compatibility with common fasteners and fishplates. The relatively low rail height and narrow base make it easy to install on temporary tracks, ground-mounted systems, and light steel structures where load capacity and space are limited.
| Type of Rail | Standard | Dimensions mm | Steel Grade | Mass M | |||
| Height | Base Width | Head Width | Web Thickness | kg/m | |||
| 9kg | GB/T 11264-2012 | 63.5 | 63.5 | 32.1 | 5.9 | Q235B | 8.94 |
Our 9kg rail is primarily manufactured from Q235B carbon structural steel, a widely used material known for its stable mechanical properties and good processing performance. Q235B offers reliable strength for light-load applications while maintaining excellent weldability and formability.
| Q235B | Mechanical Property | Chemical Composition | |||||||||
| Yield strength | Tensile strength | Elongation | Hardness | C | Mn | Si | S | P | |||
| MPa | kg/mm² | MPa | kg/mm² | min | HB | ≤ | ≤ | ≤ | |||
| ≥235 | ≥24 | 375-460 | 38-47 | 26% | 0.12-0.22 | 0.30-0.70 | 0.35 | 0.045 | 0.045 | ||
Glory Steel Work supplies 9kg rail for light-duty rail systems with stable stock and flexible order support. This rail profile is widely used for mining transport, temporary tracks, and small industrial rail lines where easy installation and cost efficiency matter.
We offer standard and cut-to-length supply to match different site conditions. Each batch is produced to GB/T 11264 requirements, with consistent dimensions and reliable surface quality to ensure smooth installation and safe operation.
What we offer
From quotation to loading, our team focuses on clear communication and practical project support, helping you get the right rail solution without unnecessary complexity.
Glory Steel Work has solid experience exporting steel rail for light-duty rail and mining projects. Before shipment, rails are bundled by size and length, securely steel-strapped, and protected with waterproof wrapping to prevent surface damage during transport.
Loading is carried out in-house using forklifts or cranes, depending on rail length and bundle weight. For overseas delivery, standard 20ft or 40ft containers are commonly used to ensure stable positioning and safe transit. Cut-to-length rails and customized packing methods are available to match different destination requirements.
Tell us your required length, quantity, and application, and our team will get back to you with clear technical advice and a fast quotation. From product selection to export packing, we’re ready to support your project with reliable supply and practical service.