Pier Caps for helical pile
Top Plate is Hot Rolled Carbon Steel ASTM A516 Gr50,
Corrison Protection Conforms to ASTM A153 Standard,
Specification for Hot-dipped Zinc Coating,
Pipe Weld 90 Degrees to Plate,
Pipe material to be ASTM A516 Gr50.
Pier Caps for helical pile Application :
Accessories of Shaft Helical Piles
Type 1 : 8″x8″x1/2″ Steel Plate,
2 3/8″OD x1/8″ wall x5″ Length.
Type 2 : 200x200x8mm Base Plate,
102 OD x4x100mm short pipe,
80x39x5mm Tringle Supporter.
Type 3: φ240mm x10mmSteel Plate,
109mmOD x9.5mm wall x220mm Length.
Type 4: φ240mm x 10mm round plate,
100mm x 100mm x 10mm wall x200mm length square tube,
120mm x 120mm x 10mm thickness square plate,
φ109mm x 9.5mmwall x 220mm length,
Surface: Hot-dipped galvanized, plain or others.
Type 5: 200mm x 200mm x 8mm or 10mm, 12mm top steel plate,
Grade 4.8 Thread Rod,
60mm-140mm outer diameter round pipe,
Surface: Hot-Dip Galvanized/Powder coated or Zinc-plated.